Arp Cachesize - Dell PowerConnect 6224 Command Line Interface Manual

arp
Use the arp command in Global Configuration mode to create an Address
Resolution Protocol (ARP) entry. Use the no form of the command to remove
the entry.
Syntax
ip-address mac-address
arp
ip-address
no arp
ip-address — IP address of a device on a subnet attached to an existing
•
routing interface.
mac-address — A unicast MAC address for that device.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example creates an ARP entry consisting of an IP address and a
MAC address.
console(config)#arp 192.168.1.2 00A2.64B3.A245

arp cachesize

Use the arp cachesize command in Global Configuration mode to configure
the maximum number of entries in the ARP cache. To return the maximum
number ARP cache entries to the default value, use the no form of this
command.
ARP Commands
647