Split-Horizon - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Link
Interface IP
Address Version
---------- ----------
-- ----------
vlan1 0.0.0.0
2 Both
vlan2 0.0.0.0
2 Both

split-horizon

Use the split-horizon command in Router RIP Configuration mode to set the
RIP split horizon mode. Use the no form of the command to return the mode
to the default value.
Send
Version
-------- ----------- -------
RIP-
Disable Down
RIP-
Disable Down
Routing Information Protocol Commands
Receive
Mode State
RIP
1029