Dell PowerConnect 6224 Command Line Interface Manual page 836

Example
console(config-if-vlan3)#ip pimsm hello-interval 60
ip pimsm join-prune-interval
The ip pimsm join-prune-interval command is used to configure the
interface join/prune interval for the PIM-SM router. Use the "no" form of this
command to set the join/prune interval to the default. This command
deprecates the ip pimsm message-interval command.
Syntax
interval
ip pimsm join-prune-interval
no ip pimsm join-prune-interval
interval — The join/prune interval (Range: 0–18000 seconds).
•
Default Configuration
The default join/prune interval is 60 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ip pimsm join-prune-interval
125
ip pimsm register-threshold
The ip pimsm register-threshold command is used to configure the Register
Threshold rate for the RP router to switch to the shortest path. Use the "no"
form of this command to set the register threshold rate to the default. This
command deprecates the ip pimsm register rate limit command.
836
Multicast Commands