Dell PowerConnect 6224 Command Line Interface Manual page 342

Example
The following example sets the maximum response time to 60 seconds on
VLAN 2.
console(config-vlan)#ip igmp snooping maxresponse 2
60
ip igmp snooping mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time
is set on a particular VLAN. This is the amount of time in seconds that a
switch waits for a query to be received on an interface before the interface is
removed from the list of interfaces with multicast routers attached. The range
is 1–2147483647 seconds. A value of 0 indicates an infinite time-out (no
expiration). The no form of this command sets the Multicast Router Present
Expiration time to 0. The time is set for a particular VLAN.
Syntax
ip igmp snooping mcrtexpiretime
no ip igmp mcrtexpiretime
vlan id — Number assigned to the VLAN
•
seconds — Multicast router present expiration time. (Range: 1–3600)
•
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
342
IGMP Snooping Commands
vlan-id seconds
vlan-id