Lldp Med Transmit-Tlv - Dell PowerConnect 6224 Command Line Interface Manual

Command Mode
Global Configuration
Default Value
3
Usage Guidelines
No specific guidelines.
Example
console(config)# lldp med faststartrepeatcount 2

lldp med transmit-tlv

This command is used to specify which optional TLVs in the LLDP MED set
are transmitted in the LLDPDUs. There are certain conditions that have to
be met for this port to be MED compliant. These conditions are explained in
the normative section of the specification. For example, the MED TLV
'capabilities' is mandatory. By disabling this bit, MED is effectively disable on
this interface.
Syntax Description
lldp med transmit-tlv [
location inventory
[ ] [
no med lldp transmit-tlv [
location inventory
[ ] [
Capabilities
•
network-policy
•
ex-pse
• — Transmit the extended PSE TLV
ex-pd
• — Transmit the extended PD TLV
Location
• — Transmit the location TLV
Inventory
• — Transmit the inventory TLV
capabilities
]
capabilities
]
— Transmit the capabilities TLV
— Transmit the network policy TLV
network-policy
] [
network-policy
] [
ex-pse ex-pd
] [ ] [
ex-pse ex-pd
] [ ] [
LLDP Commands
]
]
409