Dell PowerConnect 6224 Command Line Interface Manual page 661

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the circuit ID and remote agent ID options.
console(config)#bootpdhcprelay cidridoptmode
Circuit Id and Remote Agent Id Mode set Successfully.
show bootpdhcprelay
Use the show bootpdhcprelay command in User EXEC mode to display the
BootP/DHCP Relay information.
Syntax
show bootpdhcprelay
Default Configuration
The command has no deafult configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
661
DHCP and BOOTP Relay Commands