Dell PowerConnect 6224 Command Line Interface Manual page 840

Syntax
ip pimsm ssm {default |
no ip pimsm ssm
• default — Defines the SSM range access list to 232/8.
group-address group-mask — defines the SSM range.
•
Default Configuration
There is no SSM range defined by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm ssm default
console(config)#ip pimsm ssm 224.1.0.0 255.255.0.0
show bridge multicast address-table count
Use the show bridge multicast address-table count command to view
statistical information about the entries in the multicast address table.
Syntax
show bridge multicast address-table count
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
840
Multicast Commands
group-address group-mask
}