Show Ipv6 Ospf Interface Vlan - Dell PowerConnect 6224 Command Line Interface Manual

show ipv6 ospf interface vlan

Use the show ipv6 ospf interface vlan command in Privileged EXEC mode to
display OSPFv3 configuration and status information for a specific vlan.
Syntax
show ipv6 ospf interface vlan {
vlan-id — Valid VLAN ID. Range is 1-4093.
•
• brief — Displays a snapshot of configured interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays ospf interface vlan information.
console#show ipv6 ospf interface vlan 10
IPv6 Address.............................
FE80::2FC:E3FF:FE90:44
ifIndex.................................. 634
OSPF Admin Mode.......................... Enable
OSPF Area ID............................. 0.0.0.1
Router Priority.......................... 1
Retransmit Interval...................... 5
Hello Interval........................... 10
Dead Interval............................ 40
986
OSPFv3 Commands
vlan-id
| brief }