Dell PowerConnect 6224 Command Line Interface Manual page 843

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group
-------- ------
show ip mcast interface
Use the show ip mcast interface command in Privileged EXEC mode to
display the multicast information for the specified interface.
Syntax
show ip mcast interface {vlan
vlan-id — Valid Ethernet port
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Ip Mask
---------------
vlan-id
| all}
Multicast Commands
843