Ipv6 Pimsm Register-Threshold; Ipv6 Pimsm Rp-Address - Dell PowerConnect 6224 Command Line Interface Manual

6200 series systems
Hide thumbs Also See for PowerConnect 6224:
Table of Contents

Advertisement

Example
console(config-if-vlan3)#ipv6 pimsm join-prune-
interval 90

ipv6 pimsm register-threshold

Use the ipv6 pimsm register-threshold command to configure the Register
Threshold rate for the RP router to switch to the shortest path. Use the "no"
form of this command to set the register threshold rate to the default.
Syntax
threshold
ipv6 pimsm register-threshold
no ipv6 pimsm register-threshold
threshold—The threshold rate (Range: 0–2000 Kbps).
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm register-threshold 250

ipv6 pimsm rp-address

Use the ipv6 pimsm rp-address command to statically configure the RP
address for one or more multicast groups. The optional keyword override
indicates that if there is a conflict, the RP configured with this command
prevails over the RP learned by BSR. Use the "no" form of this command to
remove the RP address for one or more multicast groups.
755
IPv6 Multicast Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents