Show Sflow Destination - Dell PowerConnect 6224 Command Line Interface Manual

Example
console#show sflow agent
sFlow Version.................................. 1.3;Dell
Corp.;10.23.18.28
IP Address..................................... 0.0.0.0

show sflow destination

Use the show sflow destination command to display all the configuration
information related to the sFlow receivers.
Syntax
rcvr-index
show sflow
rcvr index — The index of the sFlow Receiver to display (Range: 1–8).
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Receiver Index
Owner String
Time Out
Max Datagram
Size
Port
1228
Sflow Commands
destination
The sFlow Receiver associated with the sampler/poller.
The identity string for receiver, the entity making use of this
sFlowRcvrTable entry.
The time (in seconds) remaining before the receiver is released
and stops sending samples to sFlow receiver.
The maximum number of bytes that can be sent in a single sFlow
datagram.
The destination Layer4 UDP port for sFlow datagrams.