Dell PowerConnect 6224 Command Line Interface Manual page 278

Default Configuration
There are no ARP ACL rules created by default.
Command Mode
ARP Access-list Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-arp-access-list)#permit ip host
1.1.1.1 mac host 00:01:02:03:04:05
show arp access-list
Use the show arp access-list command to display the configured ARP ACLs
with the rules. Giving an ARP ACL name as the argument would display only
the rules in that ARP ACL.
Syntax
acl-name
show arp access-list [ ]
acl-name
— A valid ARP ACL name (Range: 1–31 characters).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
console#show arp access-list
278
Dynamic ARP Inspection Commands