Show Captive-Portal Configuration Client Status - Dell PowerConnect 6224 Command Line Interface Manual

CP Name................................... cp1
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0
Port: 1 Gigabit - Level
User Name................................. user123
Session Time.............................. 0d:00:00:13

show captive-portal configuration client status

Use the show captive-portal configuration client status command to display
the clients authenticated to all captive portal configurations or a to specific
configuration.
Syntax
show captive-portal configuration [
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name
Interface
----- --------------- ------------------ -----------------
---------
1 cp1
1/g1
1076
Captive Portal Commands
cp-id
] client status
Client MAC Address Client IP Address
0002.BC00.1290 10.254.96.47