Boot Host Dhcp - Dell PowerConnect 6224 Command Line Interface Manual

boot host auto-save
The boot host auto-save command enables/disables the option to
automatically save configuration files downloaded to the switch by Auto
Config.
Syntax
boot host auto-save
no boot host auto-save
Default Configuration
The downloaded configuration is not automatically saved by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#no boot host auto-save

boot host dhcp

The boot host dhcp command is used to enable/disable Auto Config on the
switch.
Syntax
boot host dhcp
no boot host dhcp
Default Configuration
Auto Config is enabled.
1055
Autoconfig Commands