Spanning-Tree Mst Port-Priority - Dell PowerConnect 6224 Command Line Interface Manual

6200 series systems
Hide thumbs Also See for PowerConnect 6224:
Table of Contents

Advertisement

Port-Channel
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the MSTP instance 1 path cost for
interface 1/g9 to 4.
console(config)#interface ethernet 1/g9
console(config-if-1/g9)#spanning-tree mst 1 cost 4

spanning-tree mst port-priority

Use the spanning-tree mst port-priority command in Interface Configuration
mode to configure port priority. To return to the default port priority, use the
no form of this command.
Syntax
spanning-tree mst
no spanning-tree mst
instance-ID — ID of the spanning-tree instance. (Range: 1-15)
priority — The port priority. (Range: 0–240 in multiples of 16)
Default Configuration
The default port-priority for IEEE MSTP is 128.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
— 20,000
instance-id
port-priority
instance-id
port-priority
priority
Spanning Tree Commands
553

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents