Ip Pimsm - Dell PowerConnect 6224 Command Line Interface Manual

User Guidelines
This command has no user guidelines.
Example
ttlvalue
The following example applies a of 5 to the VLAN 15 routing
interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip multicast ttl-threshold
5

ip pimsm

The ip pimsm command is used to administratively enable PIM-SM
multicast routing mode on a particular router interface. Use the "no" form of
this command to disable PIM SM on an interface. This command deprecates
the ip pimsm mode command.
Syntax
ip pimsm
no ip pimsm
Default Configuration
PIM-SM is disabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ip pimsm
832
Multicast Commands