Dell PowerConnect 6224 Command Line Interface Manual page 624

dot1x system-auth-control
Use the dot1x system-auth-control command in Global Configuration mode
to enable 802.1x globally. To disable 802.1x globally, use the no form of this
command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
The default for this command is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables 802.1x globally.
console(config)# dot1x system-auth-control
dot1x timeout guest-vlan-period
Use the dot1x timeout guest-vlan-period command in Interface
Configuration mode to set the number of seconds that the switch waits
before authorizing the client if the client is a dot1x unaware client.
Syntax
seconds
dot1x timeout guest-vlan-period
seconds —
Time in seconds that the switch waits before authorizing the
client if the client is a dot1x unaware client.
624
802.1x Commands