Dos-Control Icmp - Dell PowerConnect 6224 Command Line Interface Manual

6200 series systems
Hide thumbs Also See for PowerConnect 6224:
Table of Contents

Advertisement

dos-control firstfrag
Use the dos-control firstfrag command in Global Configuration mode to
enable Minimum TCP Header Size Denial of Service protection. If the mode
is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress having a TCP Header Size smaller than the configured value,
the packets are dropped.
Syntax
dos-control firstfrag [
no dos-control firstfrag
size —TCP header size. (Range: 0-255). The default TCP header size is 20.
ICMP packet size is 512.
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a minimum TCP header size of 20. Packets
entering with a smaller header size are dropped.
console(config)#dos-control firstfrag 20

dos-control icmp

Use the dos-control icmp command in Global Configuration mode to enable
Maximum ICMP Packet Size Denial of Service protections. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If ICMP
Echo Request (PING) packets ingress having a size greater than the
configured value, the packets are dropped.
1132
Denial of Service Commands
size
]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents