Redirect - Dell PowerConnect 6224 Command Line Interface Manual

The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new DiffServ policy named
"DELL."
console(config)#policy-map DELL
console(config-policy-classmap)#

redirect

Use the redirect command in Policy-Class-Map Configuration mode to
specify that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
Syntax
interface
redirect
interface — Specifies any valid interface. Interface is Ethernet port or
•
port-channel (Range: lag1–lag18)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to redirect incoming packets to port 1/g1.
config-policy-classmap
console(
478
QoS Commands
)#redirect 1/g1