Dell PowerConnect 6224 Command Line Interface Manual page 375

console(config-if-1/g1)#ipv6 traffic-filter DELL_IP6
in
show ipv6 access-lists
The show ipv6 access-lists command displays an IPv6 access list and all of the
rules that are defined for the IPv6 ACL. Use the [name] parameter to identify
a specific IPv6 ACL to display.
Syntax
show ipv6 access-lists [name]
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays configuration information for the IPv6 ACLs.
console#show ipv6 access-lists
Current number of all ACLs: 1 Maximum number of all ACLs: 100
IPv6 ACL Name Rules Direction Interface(s)
VLAN(s)
------------------------------- ----- --------- -------------------
- -------------
STOP_HTTP 2 inbound 1/g1
console#show ipv6 access-lists STOP_HTTP
375
IPv6 Access List Commands