Show Sntp Status - Dell PowerConnect 6224 Command Line Interface Manual

Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server
---------
-----
10.27.128.21

show sntp status

Use the show sntp status command in Privileged EXEC mode to show the
status of the Simple Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Key
-----------
Disabled
Polling
-----------
Enabled
Clock Commands
Priority
-----
1
1097