Dell PowerConnect 6224 Command Line Interface Manual page 613

trust
• Trust the dot1p priority or DSCP values contained in packets
—
arriving on the voice vlan port.
• untrust Do not trust the dot1p priority or DSCP values contained in
—
packets arriving on the voice vlan port.
• dscp The DSCP value (Range: 0–64).
—
Default Configuration
The default DSCP value is 46.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/g1)#voice vlan 1
console(config-if-1/g1)#voice vlan dot1p 1
console(config-if-1/g1)#voice vlan none
console(config-if-1/g1)#voice vlan untagged
voice vlan data priority
This command is to either trust or not trust (untrust) the data traffic arriving
on the voice VLAN port.
Syntax
voice vlan data priority { trust | untrust }
• trust Trust the dot1p priority or DSCP values contained in packets
—
arriving on the voice vlan port.
untrust
• Do not trust the dot1p priority or DSCP values contained in
—
packets arriving on the voice vlan port.
Voice VLAN Commands
613