History - Dell PowerConnect 6224 Command Line Interface Manual

exec-timeout
Use the exec-timeout command in Line Configuration mode to set the
interval that the system waits for user input before timeout. To restore the
default setting, use the no form of this command.
Syntax
exec-timeout
no exec-timeout
minutes — Integer that specifies the number of minutes. (Range:
•
0–65535)
seconds — Additional time intervals in seconds. (Range: 0–59)
•
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
User Guidelines
To specify no timeout, enter the exec-timeout 0 command.
Example
The following example configures the interval that the system waits until user
input is detected to 20 minutes.
console(config)#line console
console(config-line)#exec-timeout 20

history

Use the history command in Line Configuration mode to enable the
command history function. To disable the command history function, use the
no form of this command.
1144
Line Commands
minutes seconds
[ ]