Dell PowerConnect 6224 Command Line Interface Manual page 841

User Guidelines
This command has no user guidelines.
Example
The following command shows information about the entries in the multicast
address table.
console#show bridge multicast address-table count
Capacity: 1024
Used: 4
Static addresses: 2
Dynamic addresses: 1
Forbidden addresses: 1
The following table shows the information the command displays:
Field Description
Capacity The maximum number of addresses that can be stored in the
multicast address table.
Used The total number of addresses in the multicast address table.
Static addresses The number of addresses in the multicast address table that are
static IP addresses.
Dynamic The number of addresses in the multicast address table that were
addresses learned dynamically.
Forbidden The number of addresses in the multicast address table that are
addresses forbidden IP addresses.
show ip mcast
Use the show ip mcast command in Privileged EXEC mode to display the
system-wide multicast information.
Multicast Commands
841