Show Ipv6 Mld Snooping Groups - Dell PowerConnect 6224 Command Line Interface Manual

show ipv6 mld snooping groups

The show ipv6 mld snooping groups command displays the MLD Snooping
entries in the MFDB table.
Syntax
show ipv6 mld snooping groups [{vlan
address
}]
vlan_id — Specifies a VLAN ID value.
•
ipv6-multicast-address — Specifies an IPv6 Multicast address.
•
Default configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
To see the full Multicast address table (including static addresses) use the
show bridge address-table command.
Example
console#show ipv6 mld snooping groups
Vlan Ipv6 Address
---- -----------------------
---------------
1 3333.0000.0003
2 3333.0000.0004
2 3333.0000.0005
MLD Reporters that are forbidden statically:
vlan-id
| address
Type
------- -------------------
Dynamic 1/g1,1/g3
Dynamic 1/g1,1/g3
Dynamic 1/g1,1/g3
IPv6 MLD Snooping Commands
ipv6-multicast-
Ports
747