Dell PowerConnect 6224 Command Line Interface Manual page 363
6200 series systems
Hide thumbs
Also See for PowerConnect 6224:
- User manual (786 pages) ,
- Release note (34 pages) ,
- Planning and preparation manual (12 pages)
Table of Contents
Advertisement
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#no ipv6 enable
ipv6 gateway
Use the ipv6 gateway command to configure an IPv6 gateway for the
management interface. Use the "no" form of this command to reset the
gateway to the default.
Syntax
gateway-address
ipv6 gateway
no ipv6 gateway
gateway-address
—The gateway address in IPv6 global or link-local address
format.
Default Configuration
There is no IPv6 gateway configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 gateway 2003::1
console(config)#no ipv6 gateway
363
IP Addressing Commands
- Quick Links:
- Cli Reference Guide
- Using the Cli
Hide quick links:
Advertisement
Table of Contents
