Dell PowerConnect 6224 Command Line Interface Manual page 298

6200 series systems
Hide thumbs Also See for PowerConnect 6224:
Table of Contents

Advertisement

Received Pause Frames: 0
Transmitted Pause Frames: 0
The following table describes the fields shown in the display:
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
Alignment Errors
FCS Errors
Single Collision Frames Counted frames that are involved in a single collision, and
Multiple Collision
Frames
Deferred
Transmissions
Late Collisions
Excessive Collisions
Oversize Packets
298
Ethernet Configuration Commands
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
A count of frames received that are not an integral number
of octets in length and do not pass the FCS check.
Counted frames received that are an integral number of
octets in length but do not pass the FCS check.
are subsequently transmitted successfully.
A count of frames that are involved in a multiple collision,
and are subsequently transmitted successfully
A count of frames for which the first transmission attempt
is delayed because the medium is busy
Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Counted frames for which transmission fails due to
excessive collisions.
Counted frames received that exceed the maximum
permitted frame size.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents