Show Ip Vrrp Interface Stats - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
show ip vrrp interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show ip vrrp interface brief
Interface VRID IP Address
--------- ---- -------------- ------
vlan1 2
vlan2 5

show ip vrrp interface stats

Use the show ip vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats vlan
vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
•
Default Configuration
This command has no default configuration.
0.0.0.0
192.168.5.55
vlan-id vr-id
Virtual Router Redundancy Protocol Commands
Mode State
------------
Disable Initialize
Enable Initialize
1051