Show Interfaces Detail - Dell PowerConnect 6224 Command Line Interface Manual

---- ------------------------------------------------
-----------
1/g1 Port that should be used for management only
2/g1
2/g2
Ch Description
---- -----------
1 Output

show interfaces detail

Add support for a single command that shows VLAN info, STP info, Port
status info, Port configuration info. Add a command which wraps all the port
commands into a single command.
Syntax
show interfaces detail [ethernet
channel-number
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel trunkindex.
•
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
The command will be show interfaces detail {ethernet interface | port-
channel port-channel-number} where
• interface—A valid Ethernet port.
300
Ethernet Configuration Commands
interface
]
port-channel port-
| port-channel