Dell PowerConnect 6224 Command Line Interface Manual page 415

User Guidelines
This command has no user guidelines.
Example
The following example displays how to include management information in
the LLDPDU.
console(config-if-1/g3)#lldp transmit-mgmt
lldp transmit-tlv
Use the lldp transmit-tlv command in Interface Configuration mode to
specify which optional type-length-value settings (TLVs) in the 802.1AB basic
management set will be transmitted in the LLDPDUs. To remove an optional
TLV, use the no form of this command.
Syntax
lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
sys-name — Transmits the system name TLV
•
sys-desc — Transmits the system description TLV
•
sys-cap — Transmits the system capabilities TLV
•
• port desc — Transmits the port description TLV
Default Configuration
By default, no optional TLVs are included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
LLDP Commands
415