Vlan Routing - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
vlan protocol group name <
no vlan protocol group name <
groupid —The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command
groupName —The group name you want to add. The group name can be
•
up to 16 characters length. It can be any valid alpha numeric characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# vlan protocol group name 1 usergroup
vlan protocol group remove
Use the vlan protocol group remove command in Global Configuration
mode to remove the protocol-based VLAN group identified by
Syntax
vlan protocol group remove

vlan routing

Use the vlan routing command to enable routing on a VLAN. Use the "no"
form of this command to disable routing on a VLAN.
groupid > < groupName >
groupid >
groupid
groupid
VLAN Commands
.
607