Show Dot1X Clients - Dell PowerConnect 6224 Command Line Interface Manual

Field
Supplicant Timeout
Server timeout
Authenticator PAE State Current state of the authenticator PAE state machine.
Backend Authentication
State
Authentication success
Authentication fails
Supplicant MAC Address The MAC-address of the supplicant
Filter-ID

show dot1x clients

Use the show dot1x clients command in Privileged EXEC mode to display
detailed information about the users who have successfully authenticated on
the system or on a specified port.
Syntax
show dot1x clients {all |ethernet
• all — All 802.1X clients authenticated on the system
interface — A valid Ethernet interface.
•
Description
The timer used by the authenticator state machine on this
port to timeout the supplicant. The value is expressed in
seconds and will be in the range of 1 and 65535.
Time in seconds the switch waits for a response from the
authentication server before resending the request.
Possible values are Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized.
Current state of the backend authentication state
machine. Possible values are Request, Response, Success,
Fail, Timeout, Idle, and Initialize.
Counts the number of times the state machine has
received a Success message from the Authentication
Server.
Counts the number of times the state machine has
received a Failure message from the Authentication Server.
The Filter Id assigned to the client by the RADIUS server.
This field is not applicable when the Filter-Id feature is
disabled on the RADIUS server and client.
interface
}
802.1x Commands
633