Show Management Access-List - Dell PowerConnect 6224 Command Line Interface Manual

Management access-class is enabled, using access list
mlist

show management access-list

Use the show management access-list command in Privileged EXEC mode to
display management access-lists.
Syntax
name
show management access-list [
]
name — A valid access list name. (Range: 1–32 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the active management access-list.
console# show management access-list
mlist
-----
permit priority 1 ethernet 1/g1
permit priority 2 ethernet 2/g1
! (Note: all other access implicitly denied)
1156
Management ACL Commands