Ip Pimsm Spt-Threshold - Dell PowerConnect 6224 Command Line Interface Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm rp-candidate interface vlan
3 225.2.0.0 255.255.0.0

ip pimsm spt-threshold

The ip pimsm spt-threshold command is used to configure the Data
Threshold rate for the last-hop router to switch to the shortest path. Use the
"no" form of this command to set the data threshold to the default.
Syntax
threshold
ip pimsm spt-threshold
no ip pimsm spt-threshold
threshold — The threshold rate (Range: 0–2000 Kbps).
•
Default Configuration
The default data threshold is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm spt-threshold 1000
ip pimsm ssm
The ip pimsm ssm command is used to define the Source Specific Multicast
(SSM) range of IP multicast addresses. Use the "no" form of this command to
disable the SSM range.
839
Multicast Commands