Priority - Dell PowerConnect 6224 Command Line Interface Manual

Default Configuration
The default port number is 49.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify server port number 1200.
console(tacacs)#port 1200

priority

Use the priority command in TACACS Configuration mode to specify the
order in which servers are used, where 0 (zero) is the highest priority.
Syntax
priority [ priority ]
priority — Specifies the priority for servers. 0 (zero) is the highest priority.
•
(Range: 0 – 65535)
Default Configuration
If left unspecified, this parameter defaults to 0 (zero).
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to specify a server priority of 10000.
TACACS+ Commands
567