Show Dot1X - Dell PowerConnect 6224 Command Line Interface Manual

Example
The following command sets the number of seconds that the switch waits for
a response to an EAP-request/identity frame to 3600 seconds.
console(config)# interface ethernet 1/g16
console(config-if-1/g16)# dot1x timeout tx-period
3600

show dot1x

Use the show dot1x command in Privileged EXEC mode to display 802.1X
status for the switch or for the specified interface. This feature is an extension
of Dot1x Option 81 feature added in Power Connect Release 2.1. The feature
accepts a VLAN name as an alternative to a number when RADIUS indicates
the Tunnel-Private-Group-ID for a supplicant.
Syntax
interface
show dot1x [ethernet ]
interface — A valid Ethernet interface.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1X port 1/g8 status.
console#show dot1x ethernet 1/g8
Administrative Mode............... Disabled
630
802.1x Commands