Ipv6 Mld Query-Interval - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
ipv6 mld-proxy unsolicited-report-interval
no ipv6 mld-proxy unsolicited-report-interval
interval — The interval between unsolicited reports (Range: 1–260
•
seconds).
Default Configuration
The unsolicited report interval is 1 second by default.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines
Example
console(config-if-vlan3)#ipv6 mld-proxy unsolicit-
rprt-interval 10

ipv6 mld query-interval

The ipv6 mld query-interval command sets the MLD router's query interval
for the interface. The query-interval is the amount of time between the
general queries sent when the router is querying on that interface. Use the
"no" form of this command to set the query interval to the default.
Syntax
ipv6 mld query-interval
no ipv6 mld query-interval
query-interval — Query interval (Range: 1–3600).
•
Default Configuration
The default query interval is 125 seconds.
query-interval
interval
IPv6 Routing Commands
775