Show Ipv6 Ospf Interface Stats - Dell PowerConnect 6224 Command Line Interface Manual

show ipv6 ospf interface stats

Use the show ipv6 ospf interface stats command in User EXEC mode to
display the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Syntax
vlan-id
show ipv6 ospf interface stats vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the interface statistics for VLAN 5.
console>show ipv6 ospf interface stats vlan 5
OSPFv3 Area ID.................................
0.0.0.1
Spf Runs....................................... 265
Area Border Router Count....................... 1
AS Border Router Count......................... 0
Area LSA Count................................. 6
IPv6 Address...................................
FE80::202:BCFF:FE00:3146/1283FFE::2/64
984
OSPFv3 Commands