Block - Dell PowerConnect 6224 Command Line Interface Manual

Configured Captive Portals..................... 1
Active Captive Portals......................... 0
Local Supported Users.......................... 128
Configured Local Users......................... 3
System Supported Users......................... 1024
Authenticated Users............................ 0
Captive Portal Configuration Commands
The commands in this section are related to captive portal configurations.

block

Use the block command to block all traffic for a captive portal configuration.
Use the "no" form of this command to unblock traffic.
Syntax
block
no block
Default Configuration
Traffic is not blocked by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#block
1066
Captive Portal Commands