Ip Helper-Address (Global Configuration) - Dell PowerConnect 6224 Command Line Interface Manual

clear ip helper statistics
Use the clear ip helper statistics command to reset to 0 the statistics
displayed in show ip helper statistics.
Syntax
clear ip helper statistics
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear ip helper statistics

ip helper-address (global configuration)

Use the ip helper-address (global configuration) command to configure the
relay of certain UDP broadcast packets received on any interface. To delete an
IP helper entry, use the no form of this command.
Syntax
ip helper-address
mobile-ip | nameserver | netbios-dgm | netbios-ns | ntp | pim-auto-rp | rip
| tacacs | tftp | time ]
no ip helper-address [
isakmp | mobile-ip | nameserver | netbios-dgm | netbios-ns | ntp | pim-
auto-rp | rip | tacacs | tftp | time ]
server-address — The IPv4 unicast or directed broadcast address to which
•
relayed UDP broadcast packets are sent. The server address cannot be an
IP address configured on any interface of the local router.
710
IP Helper Commands
server-address dest-udp-port
[
server-address
| dhcp | domain | isakmp |
dest-udp-port
] [
| dhcp | domain |