Show Sflow Polling - Dell PowerConnect 6224 Command Line Interface Manual

Example
console# show sflow 2 destination
Receiver Owner
Index String
-------- -------- ---------- ------------ ----- ------------------
------------
2

show sflow polling

Use the show sflow polling command to display the sFlow polling instances
created on the switch.
Syntax
rcvr-index
show sflow
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces to poll.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Poller Data The sFlowDataSource (unit/port) for this sFlow sampler. This
Source agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters
associated with this data source.
Time out Max Datagram Port
Size
0 1400
polling [ ethernet
IP Address
6343 0.0.0.0
interfaces
]
Sflow Commands
1229