Timeout - Dell PowerConnect 6224 Command Line Interface Manual

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the timeout value as 30.
console(config)#tacacs-server timeout 30

timeout

Use the timeout command in TACACS Configuration mode to specify the
timeout value in seconds. If no timeout value is specified, the global value is
used.
Syntax
timeout [ timeout ]
timeout — The timeout value in seconds. (Range: 1–30)
•
Default Configuration
If left unspecified, the timeout defaults to the global value.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
This example shows how to specify the timeout value.
console(config-tacacs)#timeout 23
571
TACACS+ Commands