Show Ipv6 Mld Traffic - Dell PowerConnect 6224 Command Line Interface Manual

2 3

show ipv6 mld traffic

The show ipv6 mld traffic command is used to display MLD statistical
information for the router.
Syntax
show ipv6 mld traffic
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed:
Valid MLD Packets
Received
Valid MLD Packets Sent
Queries Received
Queries Sent
Reports Received
Reports Sent
Leaves Received
Leaves Sent
Bad Checksum MLD
Packets
Malformed MLD Packets
808
IPv6 Routing Commands
0
The number of valid MLD packets received by the
router.
The number of valid MLD packets sent by the router.
The number of valid MLD queries received by the
router.
The number of valid MLD queries sent by the router.
The number of valid MLD reports received by the
router.
The number of valid MLD reports sent by the router.
The number of valid MLD leaves received by the router.
The number of valid MLD leaves sent by the router.
The number of bad checksum MLD packets received by
the router.
The number of malformed MLD packets received by the
router.
4 ----- -----