Dell PowerConnect 6224 Command Line Interface Manual page 1245

ipaddress — Specifies the IP address of the management station. If no IP
•
address is specified, all management stations are permitted.
viewname — Specifies the name of a previously defined view. For
•
information on views, see the user guidelines. (Range: 1-30 characters)
Default Configuration
No community is defined.
Command Mode
Global Configuration mode
User Guidelines
You can not specify
You can use the view name to restrict the access rights of a community string.
When it is specified:
• An internal security name is generated.
• The internal security name for SNMPv1 and SNMPv2 security models is
mapped to an internal group name.
• The internal group name for SNMPv1 and SNMPv2 security models is
mapped to a view name. If ro is specified, then read-view and notify-view
are mapped. If rw is specified, then read-view, notify-view, and write-view
are mapped.
Example
The following example configures community access string public to permit
administrative access to SNMP at an administrative station with IP address
192.168.1.20.
console(config)# snmp-server community public su
ipaddress 192.168.1.20
viewname
for su, which has an access to the whole MIB.
SNMP Commands
1245