Show Sflow Sampling - Dell PowerConnect 6224 Command Line Interface Manual

Example
console# show sflow 1 polling
Poller
Data Source
-----------
1/g1

show sflow sampling

Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
rcvr-index
show sflow
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces on which data is sampled.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Sampler Data
Source
Receiver Index
Packet Sampling
Rate
1230
Sflow Commands
Receiver
Index
-------
1
sampling [ ethernet
The sFlowDataSource (unit/port) for this sFlow sampler. This
agent will support Physical ports only.
The sFlowReceiver configured for this sFlow sampler.
The statistical sampling rate for packet sampling from this
source.
Poller
Interval
-------
0
interfaces
]