Ip Multicast Ttl-Threshold - Dell PowerConnect 6224 Command Line Interface Manual

no ip multicast
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IP multicast on the router.
console#configure
console(config)#ip multicast
console(config)#no ip multicast

ip multicast ttl-threshold

Use the ip multicast ttl-threshold command in Interface Configuration
ttlvalue ttlvalue
mode to apply a to a routing interface. is the TTL threshold
which is applied to the multicast Data packets forwarded through the
interface.
Syntax
ttlvalue
ip multicast ttl-threshold
no ip multicast ttl-threshold
ttlvalue — Specifies TTL threshold. (Range: 0-255)
•
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
831
Multicast Commands