Show Ip Vrrp - Dell PowerConnect 6224 Command Line Interface Manual

Default Configuration
There are no routes tracked by default.
The default decrement priority is 10.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds the route 2.2.2.0/24 to the virtual router tracked
list (with a priority decrement value of 20).
console(config-if-vlan10)#ip vrrp 1 track ip route
2.2.2.0/24 decrement 20

show ip vrrp

Use the show ip vrrp command in Privileged EXEC mode to display whether
VRRP functionality is enabled or disabled on the switch. The command also
displays some global parameters which are required for monitoring.
Syntax
show ip vrrp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
1048
Virtual Router Redundancy Protocol Commands