Ip Icmp Echo-Reply - Dell PowerConnect 6224 Command Line Interface Manual

no dos-control tcpfrag
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example activates TCP Fragment Denial of Service protection.
console(config)#dos-control tcpfrag

ip icmp echo-reply

Use the ip icmp echo-reply command to enable or disable the generation of
ICMP Echo Reply messages. Use the "no" form of this command to prevent
the generation of ICMP Echo Replies.
Syntax
ip icmp echo-reply
no ip icmp echo-reply
Default Configuration
ICMP Echo Reply messages are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
1136
Denial of Service Commands