Dell PowerConnect 6224 Command Line Interface Manual page 1252

no snmp-server filter
filter-name — Specifies the label for the filter record that is being updated
•
or created. The name is used to reference the record. (Range: 1-30
characters.)
oid-tree — Specifies the object identifier of the ASN.1 subtree to be
•
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as 1.3.6.2.4, or a word, such as
system. Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example, 1.3.*.4.
• included — Indicates that the filter type is included.
• excluded — Indicates that the filter type is excluded.
Default Configuration
No filter entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same filter record. Later
lines take precedence when an object identifier is included in two or more
lines.
Examples
The following example creates a filter that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interfaces group.
console(config)# snmp-server filter user-filter
system included
console(config)# snmp-server filter user-filter
system.7 excluded
console(config)# snmp-server filter user-filter
ifEntry.*.1 included
1252
SNMP Commands
filter-name oid-tree
[ ]