Dell PowerConnect 6224 Command Line Interface Manual page 920

User Guidelines
This command has no user guidelines.
Example
The following examples display information about OSPF neighbors on the
specified Ethernet and IP interfaces.
console #show ip ospf neighbor 10.1.23.50
Interface................................. vlan 20
Neighbor IP Address....................... 10.1.13.50
Interface Index........................... 65
Area Id................................... 0.0.0.1
Options................................... 0x42
Router Priority........................... 1
Dead timer due in (secs).................. 33
Up Time................................... 4 days 12 hrs 56
mins 6 secs
State..................................... Full/DR
Events.................................... 13
Retransmission Queue Length............... 0
Restart Helper Status..................... Helping
Restart Reason............................ Software Restart
(1)
Remaining Grace Time...................... 10 sec
Restart Helper Exit Reason................ In Progress
Field Descriptions
Interface — The name of the interface on which the adjacency is formed.
Neighbor IP Address — The IPv4 address on the neighbor's interface used to
form the adjacency.
Interface Index — The SNMP interface index.
920
OSPF Commands